SELECTION OF FILAMENTS

     
     
     
     
 

 

Listed down are the limited range of filaments. In case of any queries, we will be pleased to advice you for the best filaments to suit requirement. You can either use the chart given below or contact us for the selection of filaments.

 

 
 
  Diameter Material
Surface Cleaning 0.3 mm to 0.56 mm Nylon
& Rinsing 0.3 mm to 0.56 mm Polypropylene
Aggressive Cleaning 0.56 to 0.70 mm Nylon
  0.56 to 0.70 mm Polypropylene

Heavy Duty Finishing 		0.3 mm - 600 grit-20% Loading Abrasive Filaments:
  0.46 mm - 600 grit-20% Loading Aluminum Oxide (Al2 O3)
  0.56 mm - 320grit-30% Loading Aluminum Oxide (Al2 O3)

Heavy Duty Oxide		 0.46 mm - 500 grit-30% Loading Silicon Carbide / Al2 O3

& Scale Reduction 		0.56 mm - 320 grit-30% Loading Silicon Carbide / Al2 O3
  0.76 mm - 240 grit-30% Loading Silicon Carbide / Al2 O3
  0.89 mm - 180 grit-30% Loading Silicon Carbide / Al2 O3
  1.02 mm - 120 grit-40% Loading Silicon Carbide / Al2 O3
  1.02 mm - 80 grit-40% Loading Silicon Carbide / Al2 O3
Heavy Duty Deburring 0.06 to 1.2 mm Wires*

 

Wires *: Crimped Carbon Steel, Stainless Steel, Brass Coated Steel, Nickel Silver.

 
 
 
<<  Back